.png){kind=icon}
+603-80519201.png){kind=icon}
knbtechnologiessdnbhd@gmail.com
KNB Technologies
Sdn Bhd
9, Jalan MU 1/1D, Seksyen 1, Taman Perindustrian Meranti Utama, Puchong, 47120 Selangor, Malaysia.
+603-8051 9201
CM545Z
| Previous | 2 / 4 | Next |
ZNC DIE SINKER EDM SERIES
Accessories
Optional Accessories
Features
Programmable cnc control; an average power output circuit design as well as traditional machine, it brings a steady, low electrode wear and fine finish processing on the job and more.
Specification
Power Supplier Unit
Dielectric
Specification
| Model | Unit | CM545Z |
|---|---|---|
| Table size (WxD) | mm/inch | 800x500/31.5x19.7 |
| Table travel (XxY) | mm/inch | 500x400/19.7x15.7 |
| U,V axis travel (OB) | mm | ±5 |
| Work tank size (WxDxH) | mm/inch | 1250x700x500/49.2x27.6x19.7 |
| Ram travel (Z1) | mm/inch | 500/19.7 |
| Distance form RAM platen work table | mm/inch | 205~705/8.1~28 |
| Max. electrode weight (without OB) | kg/lb | 300/660 |
| Max. electrode weight (with OB) | kg/lb | 15/33 |
| Max. workpiece weight | kg/lb | 1500/3300 |
| Outside dimensions (WxDxH) | mm/inch | 3380x2310x2650/133.07x99.9x104.3 |
| Weight | kg/lb | 3200/7040 |
| For Dielectric | - | D545 |
Power Supplier Unit
| Model | Unit | 50EZ | 75EZ | 50B Booster | 75B Booster |
|---|---|---|---|---|---|
| Max. machining current | A | 50 | 75 | 50 | 75 |
| Max. power input | KVA | 4 | 5 | 4 | 5 |
| Max. machining speed | mm3/min | 350 | 550 | 350 | 550 |
| Electrode wear rate | % | 0.2 | 0.2 | - | - |
| Best surface roughness | μm/Ra | 0.45/0.2 (OB) | 0.45/0.2 (OB) | - | - |
| Outside dimensions | mm | 620x720x1860 | 620x720x1860 | 450x470x1650 | 450x470x1650 |
| Weight | kg/lb | 200/440 | 240/528 | 200/440 | 240/528 |
Dielectric
| Model | Unit | D545 |
|---|---|---|
| Volume | L | 720 |
| Filter | method | Paper filter |
| Pump Power | HPxset | 0.5x2 |
| Weight | kg/lb | 110/242 |
| Outside dimensions | mm/inch | 1800x800x500/70.8x31.4x19.6 |
Accessories
Standard Accessories
- Paper fifter x 2 set
- Clamping kits x 1 set
- Tool box x 1 set
- Flushing nozzle x 2 sets
- Drill chuck x 1 set
- Machine stand x 1 set
- Electrode holder x 1 set
- Halogen work lamp x 1 set
Optional Accessories
- Build-in Loran Orbitor
- Fire extinguisher
- Magnetic base
- Z AXIS LINEAR SCALE
- System 3R Tooling
- Erowa Tooling
- CE Conformity
Features
- Adopted ac servo motor design in Z-axis free of confusion about motor brush replacement.
- 15''' TFT LCD monitor
- Programmable cnc control; an average power output ciruit design as well as traditional machine, it brings a steady, low electrode wear and fine finish processing on the job, and more.
- Built in anti-arc protection.